Emergency luminaires
Each fitting checked for correct operation and light output when normal power is lost.
Cairns & Far North Queensland
Emergency & Exit Light Testing in Cairns
Testing, inspection, reporting and maintenance of emergency and exit lighting for commercial, government and managed facilities across Cairns and Far North Queensland.
Why it matters
Emergency Lighting Testing & Compliance
When the power fails, emergency lights illuminate escape routes and exit signs show people the way out. These systems sit idle most of the time, so a flat battery or failed lamp often goes unnoticed until the moment it is needed.
Regular inspection and testing is how building owners and facility managers in Cairns confirm their emergency and exit lighting will actually work, identify failures early and keep the records needed to show testing has been done.
Scope
What We Test
A complete check of the emergency and exit lighting across your site.
Illuminated exit signs
Exit signs inspected for illumination, visibility, damage and correct operation.
Batteries & discharge performance
Battery-backed fittings tested to confirm they run for their required duration.
Fittings & physical condition
Damaged, missing or failed fittings, diffusers and lamps identified and recorded.
Defect identification
Every failure logged by location so rectification can be planned and tracked.
Standards
Testing to AS 2293
Emergency and exit lighting in Australia is covered by AS 2293. Our testing and inspection is carried out with reference to the applicable requirements of that Standard, including routine inspections and discharge testing.
We can talk you through the testing schedule that applies to your building and help keep it on track. Testing identifies and records faults — rectifying those faults and maintaining records is what keeps a system in good working order.
Explained
The 90-Minute Discharge Test
A discharge test simulates a loss of normal power. Power to the emergency lighting circuit is interrupted and each battery-backed fitting must keep operating for its required duration — commonly 90 minutes.
Fittings that dim, flicker or switch off early usually point to a failed battery or faulty component. These are recorded by location so they can be repaired and retested.
Documentation
Reporting & Records
Facility and property managers need more than a pass or fail. After testing you receive clear documentation covering:
- Fittings and exit signs tested, by location
- Inspection and discharge test results
- Defects identified and their likely cause
- Rectification work completed
- Logbook updates and completion records
- Maintenance recommendations
Records are easy to file and share with building owners, government asset managers and auditors.
Rectification
Failed Fittings & Repairs
Testing commonly finds failed batteries, faulty fittings, damaged exit signs and lights that do not operate on loss of power. Because we are licensed electrical contractors, we can fix what we find rather than just reporting it:
- Battery replacement
- Tube and lamp replacement
- Emergency fitting and exit sign replacement
- Retesting and logbook updates after repairs
If testing finds failed emergency or exit lights, we identify the defect and provide a replacement quote straight away. Once approved, repair or replacement can be completed promptly where practical, or scheduled as required.
Ongoing testing
Multi-Site & Scheduled Testing
Emergency lighting testing is recurring work, not a one-off. We set up scheduled testing with reminders so it does not lapse, and can coordinate visits across multiple properties, commercial sites, housing portfolios, school campuses and government facilities.
Each site gets consistent records, making it simpler to track your whole portfolio. Testing can be combined with test and tag and RCD testing to reduce site visits.
Coverage
Cairns, Regional & Remote FNQ
Based in Far North Queensland, we test emergency lighting in Cairns and across the Atherton Tablelands, Cape York, the Torres Strait, the Gulf Country and remote FNQ communities and sites.
See our full service area for regional coverage details.
Available 24/7 | Servicing all Far North Queensland
Why Northern Electrical & Testing
A local testing and compliance contractor
- 100% First Nations owned and operated
- 15+ years' trade and industry experience
- Based in and servicing Cairns & FNQ
- Regional and remote capability
- Commercial and government focus
- Electrical testing and compliance specialists
Learn more about Northern Electrical & Testing.
FAQ
Emergency Light Testing Questions
How often should emergency and exit lights be tested?
Testing intervals are set by AS 2293 and the requirements that apply to your building. We can confirm the routine inspection and discharge testing schedule that applies to your site and set up recurring testing so it stays on track.
What is a 90-minute emergency light test?
It is a discharge test. Normal power to the emergency lighting is interrupted to simulate a power failure, and each battery-backed fitting is checked to confirm it keeps operating for its required duration. Fittings that dim or go out early are recorded as defects.
What happens if an emergency light fails the test?
The failed fitting is identified and recorded with its location and likely cause, and we provide a replacement quote straight away. Depending on the fault, we can replace the battery, tube or lamp, or the complete fitting or exit sign — completed promptly where practical or scheduled as required — then retest and update your records.
Do you provide testing records and reports?
Yes. You receive clear records of the fittings tested, the results, any defects found and the rectification completed, along with logbook updates and maintenance recommendations.
Can you test emergency lighting across multiple sites?
Yes. We can schedule testing across several properties, campuses or facilities and provide consistent records for each site, making it easier to manage recurring testing across a portfolio.
Do you provide emergency light testing outside Cairns?
Yes. We service all of Far North Queensland, including the Atherton Tablelands, Cape York, the Torres Strait, the Gulf Country and remote FNQ sites.
Related services
Other Testing & Electrical Services
Available 24/7 · All Far North Queensland